Ductile Cast Iron Joints
Application of connections (joints)
Fittings for ductile cast iron pipe – Pipes PE- GRP pipes – Zip tube – UPVC pipes. It is used for fluids like raw water, drinking water and sewage. And is used in the transfer port as an installation of the branching of the various valves (butterfly, pressure switch, slider, etc.) between the pipe and the direction of deviation of the pipe angle.
Size: DN 2000 DN 50
Pressure: PN6-PN10-PN16- PN25
Specifications of ductile cast iron joints
Designed in accordance with ISO3732-DIN EN 545- ISO 2531
Drilling of flanges according to ISO9005-2 is equivalent to DIN EN1092-2, DIN2501
Covering the use of bitumen with the standard ISO8179 production under standard conditions
Joints Packing
Joints are usually arranged in bulk and packed on a truck or other vehicle. On customer request, the joints can be packed in wooden boxes or on pallets.
Joints layout
Depending on the type and size of the connections, they can be done in both vertical and network mode
- Description
Other Products of the company
- Ductile cast iron butterfly valve with manual and electric operation from 100 to 2000 mm
- Ductile iron cast sliding valve with rubber tab from 50 to 500 mm
- Automatic control valves (discharge, surging and…)
- Vertical and interment fire hydrants
- One-way valves (hinged and loaded)
- Types of strainers (Y-shaped and T-shaped)
- Air valves (single chamber single vented, single chamber double vented, double chamber double vented, single vented large orifice)
- Steel valves including butterfly valve, Y and T shaped strainer, one-way water hammering valve from 100 to 2000 mm
- Steel joints including disassemble joint – flanges – three way – knee joint – coupling adaptor – expandable joint
- Downloads
- Certificates