Flanged Butterfly Valve
Butterfly valves are used for connecting and disconnecting the current for liquids like raw water, drinking water and non-corrosive liquids of up to 70 degrees Centigrade and use of butterfly valves as current controller in transfer lines is not permitted and it must be in a completely open or closed state.
- Description
Description
Butterfly Valve features:
- Valve design according to DIN EN 593 (DIN 3354) standard
- Flange to flange according to DIN (EN 558 -1 series 14) DIN 3202 – F4
- Flange dimensions according to (DIN EN 1092 – 2 (DIN 2501)
- Bearing packing out of the propeller’s center in the body
- Disc design such that the resistance is at its minimum against liquid flow
- Installable in all positions (horizontal, vertical, angled)
- All the screws and bolts in contact with water are from stainless steel
- Electric drive can be installed on the valve
- Sealing rubber can be adjusted and replaced without removing the valve from its place
- The gearbox can be replaced without cutting off the transfer lines
- Machining of the valve seat drive according to ISO 5201 standard
- Machining of the valve gearbox seat according to ISO 5211 standard
- Sealing possible on both sides of the valve
- The valve can be closed with manual gate valve in clockwise direction
- Downloads
- Certificates
Downloads
Certificates
